Siding Installation in Everett, WA
That dark streak running down your wall below the second-story window? Nine times out of ten it isn't dirt – it's water finding its way behind the cladding. Everett's marine air does a number on poorly detailed siding, and once moisture gets behind a panel it doesn't dry out, it just keeps moving. Our Everett siding installation crews handle full re-sides, partial replacements, and the kind of substrate repair that nobody warns you about until tear-off day.
We respond within 24 hours
Siding Installation Service Overview
Most of the homes we touch around Everett fall into a few buckets – 1950s to ’70s ramblers in places like Bayside and View Ridge, ’80s and ’90s tract builds in Silver Lake, plus newer construction up toward Lake Stevens. Each generation has its own quirks. We install vinyl, fiber cement (Hardie board is what most folks ask for), engineered wood, longboard aluminum, and natural cedar. No house gets the same recommendation, because no two exposures are the same – a south-facing wall above a bluff catches eight times the UV and wind-driven rain a sheltered back wall does. That matters for material choice.
Siding Installation Cost and Investment
Pricing in Everett varies more than people expect, and the honest answer is: it depends on what’s behind the existing siding. Vinyl sits at the low end. Fiber cement and engineered wood land in the middle once you factor in the labor – they’re heavier, slower to hang, and the cuts need to be sealed before they go up. Longboard aluminum runs the highest. Then there’s the wildcard: substrate. I’ve pulled siding off Everett homes from the ’60s and found wet sheathing four sheets deep. That’s a sheathing replacement, not a re-side, and it has to be priced after tear-off. For what it’s worth, exterior cladding has held the top spot for resale ROI for years – most reports put recovery between 60% and 80%. We give itemized estimates so you can see exactly where the money goes. Free on-site quote, no sales script.
Our Everett Siding Installation Services
Hanging panels is maybe 40% of any siding installation in Everett, WA. The rest is what determines whether your walls are dry in ten years.
Siding Installation & Replacement
Strip the old siding, pull the wrap, inspect every inch of sheathing – that's the first day. Once we know what we're working with, the rebuild follows the right order: substrate repair, new house wrap, lapped flashing at windows and penetrations, trim, panels, sealant. New-home installation siding Everett projects follow the same sequence minus the demo.
Siding Repair
Localized damage doesn't always justify a full re-side. Storm hits, a branch comes down, a contractor twenty years ago skipped flashing under one window – we'll match the existing material and patch it properly. The trick is making the repair invisible, which depends on color match (UV fades panels over time) and the right blind-fastening technique. That's where most repair jobs go sideways.
Weather Barrier & Insulation
Before any panel goes back up, the house wrap goes on – lapped shingle-style, taped at every seam, sealed around every window and pipe. On homes near the Sound where wind-driven rain is the rule from October through March, we often add a rainscreen: a thin furring layer that lets the wall breathe. Costs a bit more. Pays itself back in dry sheathing.
Trim, Fascia & Soffit
A new siding installation Everett WA project doesn't read as finished if the fascia and soffit are still the original aluminum-wrapped wood from 1968. We replace what's tired, paint or coat what's not, and tie the trim profile into the new siding so the eye doesn't catch a transition.
Maintenance & Re-Caulking
Not every house needs a full project. Sometimes the right answer is fresh sealant at the joints, a fastener check, and a coat of paint on the trim. We'll tell you when that's the right call.
Rainwood also offers interior renovations. Contact us to discuss your project.
See Our Work in Action
Watch how we transform homes with quality siding installation.
Common Problems We Fix in Everett
The signs that usually mean it's time to call an Everett siding installation contractor:
Why Choose Rainwood for Everett Siding Installation?
Plenty of guys can hang vinyl. The difference shows up at year seven – that’s when the bad flashing decisions catch up. Manufacturers like James Hardie require certified installation for the warranty to apply. Without that credential, the product warranty is paper. We’re certified, we’re local – our shop is on Hwy 99 – and we back the labor in writing.
- Honest call on repair vs. replace after on-site inspection
- Weather detailing built for Snohomish County rain and marine exposure
- James Hardie certified – manufacturer warranty stays intact
- Itemized written estimates, no mystery line items
- Site stays clean every day, not just on the final walkthrough
10+
Years Experience
Our Recent Projects
Browse through some of our recent siding installations and repairs across the Greater Seattle area.
Great people. Showed up early and stayed late to get the job done. Work was excellent. Price was the best i found after four quotes. Would definitely use this company again.
We hired Rainwood Construction LLC to replace our French doors, and the result was outstanding. We knew going in this was more involved than a standard swap — we switched from inward to outward swinging doors, requiring extra attention to framing, flashing, and weatherproofing to keep everything sealed against water intrusion.Anatoliy was our point of contact and led the project from before to after, making sure the swing change and weatherproofing were planned and executed correctly. Igor and Vitaly handled the on-site installation and did excellent, high-quality work. The whole team was on time, professional, and delivered top-notch results. Can’t recommend them highly enough. 5 stars!
Every member of this crew I've had the pleasure of coming in contact with has been professional, excellent in their skillset, and fast. Pricing was reasonable for the excellent job they did.Last year we hired Rainwood to do plumbing and painting for a job. Both crews did such a great job, were thorough, and the level of detail was fantastic!We liked them so much we recently hired them for a quick job (installing ceiling fans). We messaged on a Wednesday and the job was done by Friday.Will absolutely hire Rainwood again and again for every job we do for our home.
Working with Rainwood Constructions on our house remodel was an excellent experience from start to finish. Their contractors were highly professional, skilled, and attentive to detail, and the quality of their work exceeded our expectations. The team communicated clearly throughout the project and ensured everything was completed on time without compromising quality. We’re extremely happy with the results and would highly recommend them to anyone planning a home remodel.
We had a very good experience with Rainwood Construction LLC and Toli during my brother’s home construction project in Shoreline. The team was professional, communicative, and paid close attention to detail throughout the process. We were especially happy with the quality of the fittings and finishing work, which turned out really well. The project was handled smoothly, and the overall workmanship met our expectations. Would definitely recommend them to others looking for reliable construction services.
We had an excellent experience with them on our sunroom project. The quality of the work was outstanding, they were easy to work with, and they clearly explained each step, the schedule, and key decisions (with various options to help us understand cost) along the way. Communication was solid from start to finish, and the final result looks great. Highly recommend, they are my new go to recommendation when friends ask.
Our Simple Process
From the first phone call to the final walkthrough, the steps don't change. Here's how an Everett siding installation runs with us.
Request a Quote
Phone or form, either works. We'll set a time to come walk the exterior with you.
On-Site Assessment
Measurements, sub-surface tap test, a look at the existing flashing, and a conversation about what's realistic for the budget. Written estimate follows within a couple of business days.
Clear Scope & Schedule
Material specs, brand and product line, timeline, payment schedule, what triggers a change order – all in writing before the first nail comes out.
Quality Installation
Tear-off, substrate inspection and repair, weather barrier, flashing, trim, panels, sealant, final walk. Each step gets a check before the next one starts. Yard gets cleaned daily.
Ready to Get Started?
Contact us today for a free on-site assessment. We’re here to help protect your home.
Call us now
425-750-1025
Email us
Anatoliy@rainwoodconstruction.com
Visit us
12310 Hwy 99, Everett, WA 98204
Hours
Mon-Fri 9:00 am–6:00 pm, Sat 11:00 am–5:00 pm, Sun Closed
FAQ
A standard 2,000 sq ft re-side runs 5-10 working days depending on weather and what we find at tear-off. Wet sheathing adds time. We won’t compress the schedule by skipping the dry-in that’s how walls fail at year three.
Depends on exposure and budget. Fiber cement (Hardie) handles wind-driven rain well and holds paint. Vinyl is lower upfront cost but doesn’t take repainting if the color goes out of style. Cedar looks great for the first few years near downtown but needs upkeep within walking distance of the Sound. We’ll lay out the trade-offs before pushing a product.