Flooring Services
Most flooring contractors show up, lay material, and move on. Rainwood handles flooring services from site walk to punch list — estimating, procurement, subfloor prep, installation, and post-install inspection as one scope, not five separate contracts. Commercial, industrial, and large residential projects.
We respond within 24 hours
Flooring Services Overview
Rainwood’s commercial flooring services cover the full spectrum — from a 2,000-square-foot tenant suite to a 200,000-square-foot distribution center. Commercial means carpet tile, LVP, polished concrete, engineered hardwood, rubber, and sheet vinyl for offices, clinics, schools, and retail. Industrial flooring services get into heavier territory: epoxy and urethane systems, chemical-resistant coatings, anti-slip textures, surfaces built for forklift traffic. What makes our approach different from a typical flooring sub is scope integration. We estimate, source, prep, install, inspect, and warranty under one contract. That single-source accountability cuts the finger-pointing that plagues multi-vendor projects and keeps cost and schedule where they belong.
Pricing and Investment
There’s no honest way to quote flooring at a generic per-square-foot rate — too many variables. Material grade, substrate condition, project size, access constraints, occupied-space logistics all affect the number. Our flooring estimating services start with a site visit because that’s the only way to produce a proposal that holds. Flooring takeoff services quantify waste, transitions, pattern repeats, and edge conditions so nothing gets missed in the bid. Commercial flooring services pricing accounts for phased work, coordination with other trades, and scheduling reality. We offer free estimates — site walk and written proposal, no obligation.
OUR FLOORING SERVICES
We do more than put new floors in. Rainwood handles the full lifecycle of a flooring system — here's the scope of our professional flooring services.
Flooring Installation Services
New construction, retrofits, and TI buildouts across every major material type. Hardwood flooring services for executive suites and conference rooms. Tile flooring services spanning porcelain, ceramic, natural stone, and large-format panels. Concrete flooring services — polished concrete, epoxy, urethane, polyaspartic systems for manufacturing and distribution.
Commercial & Industrial Flooring
Office flooring projects built around acoustics, aesthetics, and maintenance ease. Industrial flooring services for warehouses, manufacturers, cold storage — anywhere the floor takes real abuse. Contract flooring services structured for the way GCs actually run their jobs.
Flooring Restoration & Cleaning
Flooring restoration services bring worn surfaces back — sanding, refinishing, patching, recoating. Hardwood flooring cleaning services go beyond mopping: screen-and-recoat cycles, scuff removal, deep restoration. Flooring cleaning services for post-construction turnover and scheduled maintenance programs.
Decorative & Specialty Floors
Decorative flooring services include acid-stained concrete, metallic epoxy, terrazzo-style overlays, and custom inlay work for lobbies, showrooms, and hospitality. Garage flooring services protect slabs with chip-flake broadcast and slip-resistant topcoats. Timber flooring services — reclaimed plank, wide-board, parquet — where projects call for natural material with commercial durability.
Inspection, Removal & Estimating
Flooring inspection services assess moisture, substrate flatness, and structural condition before anything goes down. Flooring removal services handle demo, adhesive abatement, and disposal — all compliant. Flooring estimating services and takeoff work give clients real numbers tied to real conditions.
Rainwood also offers interior renovations. Contact us to discuss your project.
See Our Work in Action
Watch how we transform homes with quality siding installation.
COMMON PROBLEMS WE FIX
These are the signs your flooring needs professional attention — not a patch job.
Flooring That Handles Northwest Humidity
Indoor humidity in Western Washington swings hard — damp through the long wet season, dry in summer — and wood flooring moves with it. Skipping acclimation is the number-one cause of gapping, cupping, and squeaks we see in this region, so hardwood and laminate sit on site and equalize before a single board goes down. Moisture readings on the subfloor come first, every time.
Many local homes also sit over vented crawlspaces, where ground moisture migrates up into the subfloor. We check for it and address vapor barriers before installation instead of discovering the problem through a failed floor a year later. And for entryways and family homes that see wet shoes eight months a year, luxury vinyl plank has become the region’s go-to for good reason — it shrugs off what Northwest winters track inside.
- On-site acclimation of hardwood and laminate before installation
- Subfloor and crawlspace moisture checks with vapor-barrier correction where needed
- LVP and LVT options suited to wet-entry Northwest households
- Refinishing and installation scheduled with indoor humidity in mind
Why Choose Rainwood?
Hiring the wrong flooring company costs more than the bid difference — it costs you in rework, delays, and floors that fail early. Rainwood runs professional flooring services with in-house estimating, project management, and field crews. No outsourced layers, no mark-up chains, no “that’s not our scope” mid-project. We build solutions around each project because a medical office and a machine shop don’t have the same flooring problems.
- Single-source accountability from bid day through warranty
- Line-item proposals: labor, material, waste factor, contingency all broken out
- Crews who work in occupied spaces without shutting down operations
- Materials matched to performance requirements, not install convenience
- Floors that last their full lifecycle with predictable maintenance costs
10+
Years Experience
Our Recent Projects
Browse through some of our recent siding installations and repairs across the Greater Seattle area.
Great people. Showed up early and stayed late to get the job done. Work was excellent. Price was the best i found after four quotes. Would definitely use this company again.
We hired Rainwood Construction LLC to replace our French doors, and the result was outstanding. We knew going in this was more involved than a standard swap — we switched from inward to outward swinging doors, requiring extra attention to framing, flashing, and weatherproofing to keep everything sealed against water intrusion.Anatoliy was our point of contact and led the project from before to after, making sure the swing change and weatherproofing were planned and executed correctly. Igor and Vitaly handled the on-site installation and did excellent, high-quality work. The whole team was on time, professional, and delivered top-notch results. Can’t recommend them highly enough. 5 stars!
Every member of this crew I've had the pleasure of coming in contact with has been professional, excellent in their skillset, and fast. Pricing was reasonable for the excellent job they did.Last year we hired Rainwood to do plumbing and painting for a job. Both crews did such a great job, were thorough, and the level of detail was fantastic!We liked them so much we recently hired them for a quick job (installing ceiling fans). We messaged on a Wednesday and the job was done by Friday.Will absolutely hire Rainwood again and again for every job we do for our home.
Working with Rainwood Constructions on our house remodel was an excellent experience from start to finish. Their contractors were highly professional, skilled, and attentive to detail, and the quality of their work exceeded our expectations. The team communicated clearly throughout the project and ensured everything was completed on time without compromising quality. We’re extremely happy with the results and would highly recommend them to anyone planning a home remodel.
We had a very good experience with Rainwood Construction LLC and Toli during my brother’s home construction project in Shoreline. The team was professional, communicative, and paid close attention to detail throughout the process. We were especially happy with the quality of the fittings and finishing work, which turned out really well. The project was handled smoothly, and the overall workmanship met our expectations. Would definitely recommend them to others looking for reliable construction services.
We had an excellent experience with them on our sunroom project. The quality of the work was outstanding, they were easy to work with, and they clearly explained each step, the schedule, and key decisions (with various options to help us understand cost) along the way. Communication was solid from start to finish, and the final result looks great. Highly recommend, they are my new go to recommendation when friends ask.
Our Simple Process
From first contact to final walkthrough, we make siding projects straightforward and stress-free.
Request a Quote
Call or fill out the form. We'll set up a site visit to walk the space and assess conditions.
On-Site Assessment
Estimating team checks substrate, measures transitions, notes access issues. Flooring estimating services produce line-item proposals — clients see where the money goes before signing.
Clear Scope & Schedule
We recommend based on how the space works — wear ratings, maintenance cost, lead times, environment. Planning covers install sequencing, delivery staging, and trade coordination.
Quality Installation
Subfloor prep, installation to manufacturer specs and ASTM standards, seam sealing, trim, transitions, surface treatments. Walkthrough against original scope before we hand the space back.
Ready to Get Started?
Contact us today for a free on-site assessment. We’re here to help protect your home.
Call us now
425-750-1025
Email us
Anatoliy@rainwoodconstruction.com
Visit us
12310 Hwy 99, Everett, WA 98204
Hours
Mon-Fri 9:00 am–6:00 pm, Sat 11:00 am–5:00 pm, Sun Closed
FAQ
Carpet tile, LVP, hardwood, polished concrete, epoxy, porcelain tile, rubber, and specialty coatings — across office, industrial, retail, and healthcare environments.
Depends on scope. A mid-size office refit might take one to two weeks. A large industrial floor can run several weeks, especially with phased scheduling around active operations.
Yes. We sand, refinish, patch, and recoat hardwood, concrete, and tile. We also run post-construction cleanup and ongoing maintenance programs for facilities protecting their investment.
Polished concrete, porcelain tile, LVP, and commercial epoxy all hold up under heavy traffic. The right pick depends on load type, chemical exposure, maintenance setup, and the space itself.