Fiber Cement Siding Installation in Arlington, WA
Arlington weather puts siding through a brutal cycle of soaking rains and high winds coming off the Cascades. If your current wood or vinyl siding is starting to buckle or show soft spots near the foundation, your home's structural integrity is already at risk. Fiber cement — specifically James Hardie — has become the standard here because it doesn't rot, but a board is only as good as the flashing above it. We install siding systems that stop moisture from ever reaching your OSB sheathing.
We respond within 24 hours
Fiber Cement Siding Service Overview
Most siding failures we see in Arlington happen at the transition points. If an installer tight-butts fiber cement against the window trim without a 1/8-inch gap and proper sealant, the board will eventually crack. It’s a simple physics problem that many crews ignore to save time. We take the opposite approach. We prioritize the “dry-in” phase – ensuring the house wrap and window tapes are integrated before the first piece of siding is even cut.
Whether you are in a newer development near Gleneagle or an older farmhouse closer to town, the goal is the same: fire resistance and low maintenance. Fiber cement doesn’t warp like vinyl or require the frequent staining of cedar. We focus on the details that matter – like using 1.25-inch roofing nails for the wrap and blind-nailing the planks so you don’t see thousands of silver heads across your wall. This isn’t just about looks. It’s about creating a wind-rated shell that stays attached during a heavy Snohomish County storm.
Investment and Financing Options
Fiber cement sits in the middle of the price spectrum – more than vinyl, but less than premium cedar. For a standard Arlington home, a full replacement usually falls between $20,000 and $45,000. This depends on the linear footage and how much rot repair we find during the tear-off. We give you a fixed-price contract. You won’t get hit with “change orders” unless we find a structural issue behind the wall that wasn’t visible during the initial walkthrough.
Financing often comes down to timing. Many Arlington homeowners use home equity lines or specialized renovation loans to fund the project. We work with your lender’s draw schedule. This ensures the money is released as we hit verified milestones – like when the demolition is complete and the new flashing is inspected.
Our Arlington Siding Installation Services
What Rainwood Construction covers for fiber cement siding installation projects.
James Hardie Lap Siding
The most popular choice for a reason. We follow the "HardieZone" Hz10 requirements strictly, ensuring your warranty remains valid.
HardieShingle & Accent
Perfect for gables. We weave the corners and use specialized metal starter strips to prevent water from wicking up into the shingles.
Board and Batten
A modern farmhouse look that requires perfect vertical alignment. We use lasers to ensure the battens are plumb across the entire span of the house.
Full Substrate Repair
If we find rot, we fix it. We don't cover up moldy plywood with new wrap; we cut it out and replace it with new CDX or OSB to match your framing.
Rainwood also offers interior renovations. Contact us to discuss your project.
See Our Work in Action
Watch how we transform homes with quality siding installation.
Common Problems We Fix in Arlington Homes
Issues we see on fiber cement jobs done by others.
Why Choose Rainwood for Arlington Siding?
The biggest risk in a siding project is the stuff you can’t see once the boards are up. We photograph every stage of the flashing and wrap process for your records.
- Core Crews Only: We don't hire temporary day labor. You get a crew that knows fiber cement.
- City of Arlington Expertise: We handle the permits and know exactly what the local building inspectors are looking for during the "shear-wall" inspection.
- Clear Communication: You get a daily update on progress and any material delays.
- Kick-out flashing at every roof-to-wall intersection, not just where code requires it.
10+
Years Experience
Our Recent Projects
Browse through some of our recent siding installations and repairs across the Greater Seattle area.
Great people. Showed up early and stayed late to get the job done. Work was excellent. Price was the best i found after four quotes. Would definitely use this company again.
We hired Rainwood Construction LLC to replace our French doors, and the result was outstanding. We knew going in this was more involved than a standard swap — we switched from inward to outward swinging doors, requiring extra attention to framing, flashing, and weatherproofing to keep everything sealed against water intrusion.Anatoliy was our point of contact and led the project from before to after, making sure the swing change and weatherproofing were planned and executed correctly. Igor and Vitaly handled the on-site installation and did excellent, high-quality work. The whole team was on time, professional, and delivered top-notch results. Can’t recommend them highly enough. 5 stars!
Every member of this crew I've had the pleasure of coming in contact with has been professional, excellent in their skillset, and fast. Pricing was reasonable for the excellent job they did.Last year we hired Rainwood to do plumbing and painting for a job. Both crews did such a great job, were thorough, and the level of detail was fantastic!We liked them so much we recently hired them for a quick job (installing ceiling fans). We messaged on a Wednesday and the job was done by Friday.Will absolutely hire Rainwood again and again for every job we do for our home.
Working with Rainwood Constructions on our house remodel was an excellent experience from start to finish. Their contractors were highly professional, skilled, and attentive to detail, and the quality of their work exceeded our expectations. The team communicated clearly throughout the project and ensured everything was completed on time without compromising quality. We’re extremely happy with the results and would highly recommend them to anyone planning a home remodel.
We had a very good experience with Rainwood Construction LLC and Toli during my brother’s home construction project in Shoreline. The team was professional, communicative, and paid close attention to detail throughout the process. We were especially happy with the quality of the fittings and finishing work, which turned out really well. The project was handled smoothly, and the overall workmanship met our expectations. Would definitely recommend them to others looking for reliable construction services.
We had an excellent experience with them on our sunroom project. The quality of the work was outstanding, they were easy to work with, and they clearly explained each step, the schedule, and key decisions (with various options to help us understand cost) along the way. Communication was solid from start to finish, and the final result looks great. Highly recommend, they are my new go to recommendation when friends ask.
Our Simple Process
From first contact to final walkthrough, we make siding projects straightforward and stress-free.
Request a Quote
Call or fill out the form. Tell us what’s on the house now and what you’re seeing – cracks, peeling paint, rot at trim. We’ll schedule a site visit.
On-Site Assessment
Moisture meter readings, sheathing probe at transitions, existing material identification. Written report with photos – yours to keep.
Clear Scope & Schedule
Profile selection, factory color, trim widths, flashing specs, labor line items, timeline. Most fiber cement re-sides run 5-10 working days.
Quality Installation
Tear-off, sheathing repair, WRB and flashing, panels course by course, trim, caulk and touch-up, daily cleanup. Final walkthrough before closeout.
Ready to Get Started?
Contact us today for a free on-site assessment. We’re here to help protect your home.
Call us now
425-750-1025
Email us
Anatoliy@rainwoodconstruction.com
Visit us
12310 Hwy 99, Everett, WA 98204
Hours
Mon-Fri 9:00 am–6:00 pm, Sat 11:00 am–5:00 pm, Sun Closed
FAQ
Usually 8 to 12 working days. If we find significant rot under the old siding, it might add a few days. We don’t trade speed for proper flashing.
Yes. The City of Arlington requires a permit for a full re-side. This ensures the new moisture barrier meets current Washington State energy codes. We handle the application and the inspections.
In our opinion, yes. Vinyl can rattle in high winds and melt if it’s near a grill or high-reflection windows. Fiber cement is non-combustible and stays rigid even in the biggest Cascades windstorms.
Yes. While it comes in pre-colored “ColorPlus” finishes, you can also get it primed and paint it any custom color you want. The paint on fiber cement lasts significantly longer than it does on wood because the boards don’t expand and contract as much.