Siding Installation in Edmonds, WA
Edmonds sits on a ridge above Puget Sound, and that view comes with a cost – salt-laden marine air corrodes fasteners, fades paint faster than the brochure says, and finds every gap in your wall assembly. Our siding installation Edmonds crews build for that exposure on purpose. Stainless or hot-dipped galvanized fasteners depending on the material, flashing details that account for wind-driven rain off the water, sealants rated for full UV at west-facing intensity. Bowl-area homes especially need this — older stock, full exposure, no margin for shortcuts.
We respond within 24 hours
Siding Installation Service Overview
Edmonds has a wide mix of housing – early-1900s craftsman in the Bowl, mid-century split-levels in Westgate, ’70s and ’80s development in Perrinville and Maplewood Hills, and newer custom builds along Sunset Ave with serious water views. Each one calls for different decisions. We install vinyl, fiber cement (mostly James Hardie), engineered wood, longboard aluminum, and natural cedar. The water-facing walls almost always get fiber cement or aluminum – not because they’re prettier, but because they hold up to the conditions. Cedar still has a place on the protected elevations.
Siding Installation Cost and Investment
Pricing for siding installation Edmonds WA varies by material, square footage, and exposure. Vinyl is the lowest entry point. Fiber cement and engineered wood land in the middle. Longboard aluminum runs highest. On view homes with wind-loaded walls, we sometimes spec heavier-gauge fasteners and additional flashing — that adds maybe 5–8% to the bid but it’s the difference between a 30-year install and a 12-year install. Substrate is the wildcard. Edmonds homes from the ’50s and ’60s sometimes hide significant moisture damage behind otherwise-intact cedar. We scope the visible work tightly and flag substrate as a priced contingency before tear-off so nothing surprises you. Free on-site estimate. No pressure conversations.
Our Edmonds Siding Installation Services
The panels people see are the last 40% of any siding project. The first 60% is what determines how long the wall actually lasts.
Siding Installation & Replacement
Full Edmonds siding installation starts with strip-down, then a real inspection of what's underneath. On salt-air-exposed walls we replace any sheathing with corrosion at the fasteners — that's not optional. Dry-in, flashing, trim, panels, sealant follow in that order. New construction follows the same sequence minus the demo.
Siding Repair
Storm damage from a winter front, localized rot under a leaky window, a section where a contractor skipped flashing twenty years ago — we do targeted repair work. Matching original colors gets harder as panels age and UV does its work, but we get close.
Weather Barrier & Insulation
Wind-driven rain off Puget Sound moves sideways. Standard house wrap detailing isn't enough – we lap, tape, and seal every seam and penetration like the wall will be hit by a hose at full pressure, because functionally it will. On west-facing elevations we run a rainscreen behind the cladding to give moisture a path to drain and dry.
Trim, Fascia & Soffit
The trim takes the same beating the siding does. On Bowl-area homes the soffits often go first – paint failure, then the wood underneath. We replace what's failed, coordinate profiles with the new cladding, and keep soffit vents clear so the attic actually breathes.
Maintenance & Re-Caulking
Sometimes the right call is sealant refresh at high-stress joints, fastener inspection, and a wash-down – not a full re-side. We'll tell you when maintenance is enough.
Rainwood also offers interior renovations. Contact us to discuss your project.
See Our Work in Action
Watch how we transform homes with quality siding installation.
Common Problems We Fix in Edmonds
The recurring issues we see on Edmonds exteriors:
Why Choose Rainwood for Edmonds Siding Installation?
Salt air punishes shortcuts. A non-stainless fastener will look fine for two years and then start bleeding rust through the panel – at which point the fix is to remove the panel, replace the fastener, and probably the panel below it. We use the right fastener for the material and the exposure, every time. Manufacturer warranties on James Hardie and others depend on certified installation; we’re certified, which keeps your warranty in force. What we offer:
- Honest assessment – repair vs. replace, with cost trade-offs in writing
- Detailing engineered for water-facing exposure
- Certified install for premium fiber cement, vinyl, and aluminum systems
- Itemized written estimates, no mystery line items
- Daily cleanup and respect for tight Bowl-area lot lines
10+
Years Experience
Our Recent Projects
Browse through some of our recent siding installations and repairs across the Greater Seattle area.
Great people. Showed up early and stayed late to get the job done. Work was excellent. Price was the best i found after four quotes. Would definitely use this company again.
We hired Rainwood Construction LLC to replace our French doors, and the result was outstanding. We knew going in this was more involved than a standard swap — we switched from inward to outward swinging doors, requiring extra attention to framing, flashing, and weatherproofing to keep everything sealed against water intrusion.Anatoliy was our point of contact and led the project from before to after, making sure the swing change and weatherproofing were planned and executed correctly. Igor and Vitaly handled the on-site installation and did excellent, high-quality work. The whole team was on time, professional, and delivered top-notch results. Can’t recommend them highly enough. 5 stars!
Every member of this crew I've had the pleasure of coming in contact with has been professional, excellent in their skillset, and fast. Pricing was reasonable for the excellent job they did.Last year we hired Rainwood to do plumbing and painting for a job. Both crews did such a great job, were thorough, and the level of detail was fantastic!We liked them so much we recently hired them for a quick job (installing ceiling fans). We messaged on a Wednesday and the job was done by Friday.Will absolutely hire Rainwood again and again for every job we do for our home.
Working with Rainwood Constructions on our house remodel was an excellent experience from start to finish. Their contractors were highly professional, skilled, and attentive to detail, and the quality of their work exceeded our expectations. The team communicated clearly throughout the project and ensured everything was completed on time without compromising quality. We’re extremely happy with the results and would highly recommend them to anyone planning a home remodel.
We had a very good experience with Rainwood Construction LLC and Toli during my brother’s home construction project in Shoreline. The team was professional, communicative, and paid close attention to detail throughout the process. We were especially happy with the quality of the fittings and finishing work, which turned out really well. The project was handled smoothly, and the overall workmanship met our expectations. Would definitely recommend them to others looking for reliable construction services.
We had an excellent experience with them on our sunroom project. The quality of the work was outstanding, they were easy to work with, and they clearly explained each step, the schedule, and key decisions (with various options to help us understand cost) along the way. Communication was solid from start to finish, and the final result looks great. Highly recommend, they are my new go to recommendation when friends ask.
Our Simple Process
Same four steps every time, written out so you know what to expect.
Request a Quote
Phone or form. We schedule a walkthrough at a time that works.
On-Site Assessment
We measure, look at existing flashing, tap-test for soft spots, and ask about any drafts or paint problems you've noticed. Written estimate within a couple of business days.
Clear Scope & Schedule
Material spec, manufacturer, color, timeline, payment terms. Substrate contingency priced and stated up front.
Quality Installation
Demo, substrate repair, dry-in, flashing, trim, panels, sealant, final walkthrough. Each step gets checked before the next. Job site stays clean throughout.
Ready to Get Started?
Contact us today for a free on-site assessment. We’re here to help protect your home.
Call us now
425-750-1025
Email us
Anatoliy@rainwoodconstruction.com
Visit us
12310 Hwy 99, Everett, WA 98204
Hours
Mon-Fri 9:00 am–6:00 pm, Sat 11:00 am–5:00 pm, Sun Closed
FAQ
Yes – significantly. For walls facing the Sound, we lean toward fiber cement (Hardie) or longboard aluminum with marine-grade finishes. Cedar still works on protected elevations. Vinyl is fine for budget-driven projects, but the color holds up better on inland-facing walls.
A typical single-family re-side runs 5-10 working days, sometimes longer on view homes with access constraints or substantial substrate repair. We commit to a realistic schedule in the proposal – not the schedule that sounds best on paper.