Exterior Painting
Nine months of rain, wind off the Sound, and temperature swings that stress every coat you put on a wall. Rainwood Construction handles exterior painting for homes and commercial buildings across Snohomish and King County — prep included, not extra.
We respond within 24 hours
What the PNW Does to Exterior Paint
Exterior paint in Western Washington fails faster than the can suggests. The problem isn’t rain alone — it’s the cycle. Wet season saturates wood fiber and raises the grain. Dry summers bake and contract it. Do that 10 times and even a well-applied coat starts to crack at the edges and delaminate from trim joints.
Cedar is the hardest surface to keep. It oils naturally, which is good for the wood — bad for paint adhesion. A cedar house that hasn’t been recoated in 6–8 years needs a full wash to remove mildew and oxidation, scraping at every loose edge, and a shellac-based or stain-blocking primer before any topcoat goes on. Skip the primer and you’re re-doing the job in 18 months.
Fiber cement is more forgiving, but it’s not maintenance-free. The factory finish on HardiePlank is good — 15-year warranty on the coating — but field cuts and trim need to be primed on-site before install. A lot of crews skip that. Then moisture wicks into the raw edge and the paint fails from the end grain outward.
What Exterior Painting Costs in the Greater Seattle Area
A standard two-story house runs $4,000–$8,500 for a full exterior repaint. What moves that number: siding type, current paint condition, story count, and how much trim you have. A simple ranch with vinyl siding in decent shape is on the lower end. A two-story cedar house with 8 years of missed recoating, detailed trim, and a covered porch — that’s a different scope.
The prep is where most low bids fall apart. A quote that skips washing, scraping, and priming isn’t cheaper — it’s incomplete. That work gets added as a change order, or it doesn’t get done and the paint fails in two years. Every Rainwood Construction exterior estimate is done on site: we assess adhesion, check for soft wood at windows and bottom courses, and price the prep into the original quote.
OUR FLOORING SERVICES
Full exterior painting scope for residential and light commercial projects across Snohomish and King County.
Full Exterior Repaints
Complete repaint of all siding, trim, fascia, soffits, and doors. Prep-to-finish scope. Cedar, fiber cement, vinyl, engineered wood — each gets the right primer and product for the surface and exposure.
New Construction Finishes
Back-prime before install, field-prime cut edges, two finish coats to spec. New construction moves fast — we coordinate with the build schedule.
Trim, Fascia & Soffit Painting
Fascia on north and west-facing elevations deteriorates fastest. Spot repaint when the siding is still solid, full repaint when the trim is running ahead of the siding cycle.
Deck & Fence Staining
Solid stain on decks — it fails more gracefully than paint and recoats without full strip. Semi-transparent where the wood grain is worth showing.
Garage Doors & Exterior Doors
Sprayed finish for a smooth result. Bonding primer on fiberglass doors, proper prep on steel to prevent rust bleed.
Rainwood also offers interior renovations. Contact us to discuss your project.
COMMON PROBLEMS WE FIX
Walk the perimeter of your house. Any of this look familiar?
WHY CHOOSE RAINWOOD CONSTRUCTION?
Prep is the job. The painting part is fast — a day or two on most houses. Getting the surface right first takes longer, and it’s where the result is actually determined.
Every exterior estimate starts with an on-site surface assessment. Adhesion test on the existing coat, moisture probe at windows and bottom siding courses, fastener condition check. What we find determines the prep scope — and the prep scope goes into the quote before work starts.
- Sherwin-Williams Duration and Emerald Exterior — built for PNW exposure
- Shellac-based primer on cedar with adhesion issues
- All prep included in quoted price — wash, scrape, sand, prime
- Stainless fasteners specified where galvanized won't hold near the Sound
10+
Years Experience
Great people. Showed up early and stayed late to get the job done. Work was excellent. Price was the best i found after four quotes. Would definitely use this company again.
We hired Rainwood Construction LLC to replace our French doors, and the result was outstanding. We knew going in this was more involved than a standard swap — we switched from inward to outward swinging doors, requiring extra attention to framing, flashing, and weatherproofing to keep everything sealed against water intrusion.Anatoliy was our point of contact and led the project from before to after, making sure the swing change and weatherproofing were planned and executed correctly. Igor and Vitaly handled the on-site installation and did excellent, high-quality work. The whole team was on time, professional, and delivered top-notch results. Can’t recommend them highly enough. 5 stars!
Every member of this crew I've had the pleasure of coming in contact with has been professional, excellent in their skillset, and fast. Pricing was reasonable for the excellent job they did.Last year we hired Rainwood to do plumbing and painting for a job. Both crews did such a great job, were thorough, and the level of detail was fantastic!We liked them so much we recently hired them for a quick job (installing ceiling fans). We messaged on a Wednesday and the job was done by Friday.Will absolutely hire Rainwood again and again for every job we do for our home.
Working with Rainwood Constructions on our house remodel was an excellent experience from start to finish. Their contractors were highly professional, skilled, and attentive to detail, and the quality of their work exceeded our expectations. The team communicated clearly throughout the project and ensured everything was completed on time without compromising quality. We’re extremely happy with the results and would highly recommend them to anyone planning a home remodel.
We had a very good experience with Rainwood Construction LLC and Toli during my brother’s home construction project in Shoreline. The team was professional, communicative, and paid close attention to detail throughout the process. We were especially happy with the quality of the fittings and finishing work, which turned out really well. The project was handled smoothly, and the overall workmanship met our expectations. Would definitely recommend them to others looking for reliable construction services.
We had an excellent experience with them on our sunroom project. The quality of the work was outstanding, they were easy to work with, and they clearly explained each step, the schedule, and key decisions (with various options to help us understand cost) along the way. Communication was solid from start to finish, and the final result looks great. Highly recommend, they are my new go to recommendation when friends ask.
OUR RECENT PROJECTS
Recent flooring replacement work by Rainwood Construction.
Request a Quote
Call or use the form. Tell us what needs painting, roughly what condition it's in, and whether it's interior, exterior, or both.
On-Site Assessment
We walk the surfaces, check adhesion on existing paint, identify any rot or moisture issues that need to go before paint does. Written scope — yours to keep.
Clear Scope & Schedule
Material specs, prep steps, coat count, timeline. Most interior repaints run 3–5 days. Full exterior repaints 4–7 days depending on size and prep load.
Painting
Prep, prime, paint, daily cleanup. Walkthrough with you before we close out.
Ready to Get Started?
Contact us today for a free on-site assessment. We’re here to help protect your home.
Call us now
425-750-1025
Email us
Anatoliy@rainwoodconstruction.com
Visit us
12310 Hwy 99, Everett, WA 98204
Hours
Mon-Fri 9:00 am–6:00 pm, Sat 11:00 am–5:00 pm, Sun Closed
FAQ
On fiber cement with a quality acrylic, 10–12 years. On cedar, 5–7 years inland — less near the Sound or on north-facing walls with heavy shade. Those areas trap moisture and grow mildew faster than a south-facing wall in full sun.
Yes — it’s in the quote, not an add-on. Painting over dirty or chalky surfaces bonds you to a layer that’s already failing.
Paint builds a film on top of the wood. Stain penetrates into the fiber. Paint looks cleaner, but when it fails, it peels. Stain weathers gradually and recoats without stripping. On decks and rough-sawn cedar, stain usually makes more sense long-term.
Yes. Bring us a chip or a can with the formula on the lid. Sherwin-Williams can spectrophotometer-match existing finishes if you have a clean sample.